TWO EXCITING and NEW CLASSES! Never-Before Taught At McMow Art Glass!

TWO EXCITING and NEW CLASSES are open for Registration at McMow Art Glass! Never-before Taught at McMow Art Glass, “Mastering Murrine” with McMow Master Phil Materio & Patti Gibbons is a 3-part workshop starting on December 15th. **NEW** SCREEN PRINTING 101 w/ SPECIAL GUEST ARTIST TONY GLANDER is a 2-Part course beginning on December 10th.  The Rickie Report shares the details and some photos here. Register now, as there are limited seats!  McMow offers the hottest classes!

 

561-585-9011 x108  Fax: 561-586-2292
www.mcmow.com    https://www.facebook.com/McMowArtGlass/

 

 

TWO EXCITING and NEW CLASSES!

Never-before Taught at McMow Art Glass!

Mastering Murrine
with McMow Master Phil Materio & Patti Gibbons

Friday, December 15th from 6-8pm
Saturday, December 16th 10am-3pm
Sunday, December 17th 10am – 1pm

 

Class Registration: $575
This 3-part course includes daily coffee & snacks, all materials & kiln firings

Murrina (plural murrine) – colored patterns or images made in a glass cane (long rods of glass) that are revealed when cut in cross-sections. The term murrina, derives from Murrino, the name given in 1878 by Vincenzo Zanetti, a Muranese priest and historian, who founded the Murano Glass Museum in 1861 with the intent to restore the lustre of Muranese glassmaking and relaunch the industry that was going through a deep crisis. The crisis was the Bad News. THE GOOD NEWS?? You don’t have to go back in time or travel to the Island of Murano to learn how to make these beautiful murrine. Learn how to prepare the glass, pull the murrine canes, slice the rods to reveal amazing designs, and create your own functional piece of art glass. This is a 3-part intensive and fusing knowledge is strongly recommended.

Class size is limited so be sure to sign up soon NOW!

About Phil Materio: For more than 40 Years Phil has practiced and educated in the finest fused glass techniques. Learning from the original founders of Bullseye Glass, Phil has taught at glass art education centers across Florida as well shows his fused glass art collections throughout Florida.

Phil will be joined by special artists and famed McMow educator, Patti Gibbons

Buckle up – this fast-paced class will blow your mind!

 

___________________________________________________

**NEW** SCREEN PRINTING 101 w/ SPECIAL GUEST ARTIST TONY GLANDER!

 

THIS IS A TWO-PART COURSE!

 

 

Saturday December 9th & Sunday December 10th 9:00am – 3:00 pm $450.00 *BEGINNER LEVEL!*

Want to add a new technique? In this class Tony Glander will show you how to add images you create to your fused or stained glass work. Words, designs or pictures can all be used in this exciting and fun process. Paints and a little Photoshop will be covered.

 

Tony Glander started working in stained glass in 1989. It didn’t take long for him to become totally hooked on making beautiful art works in colored glass. In 1990 he purchased a stained glass studio, Glass Fantasies in Gaithersburg, MD.

“I love every technique from cold glass to hot glass”.Wanting to further expand the quality of his work, Tony added silk screening to his many skills. “I never really cared for faces done in stained glass so one day I had a brainstorm – use a silk screened photo on the glass.” He tried using a picture of his wife and the results were simply stunning. “After that piece, I was hooked on using screen printing anytime I could. Although I have created a lot of really nice pieces, my best works of art are my young children Maya and Lucas.”

For more information about Tony and his work go to www.fitzpatrickglassstudios.com

 

 

For more information about these workshops , glass supplies and more:

McMow Art Glass, Inc
561-585-9011     Fax: 561-586-2292

www.mcmow.com

https://www.facebook.com/McMowArtGlass/

 

 

 

 

 

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report, contact:

Rickie Leiter, Publisher

Rickie@therickiereport.com   561-537-0291

17019 SW Sapri Way   Port St. Lucie, FL 34986

 

McMow Art Glass Announces New Fusing Technique, Specialty Classes, Mosaic Master Class And Holiday Sale Pre-Orders

McMow Art Glass announces many exciting Specialty Classes for November and December, including Open Face Kiln Casting, Making Wearable Art with Dichroic Jewelry, Liquid Caming (this is not a typo), a Master Mosaic Class with Jane Wright and “Harnessing Flow” with Gina Sneiderman & Phil Materio, to mention the highlights!  The Rickie Report shares the details about classes and the upcoming One Day Sale!

 

 

mcmow_logo_4colorproces_AI8 [Converted]

 

701 N Dixie Hwy.    Lake Worth, FL

 (561) 585-9011

 

 

NOVEMBER & DECEMBER 2016

SPECIALTY CLASSES:

 

 

 

 

NOVEMBER

 

Special Dates to Remember in November!

Saturday, November 5th –

Last Day to submit all Holiday Sale Pre – Orders.
Skip the lines while taking advantage of our biggest savings of the year!

 

 

Saturday, November 26th is Small Business Saturday –

Support your local economy by shopping small!

Special sales & give-a-ways to be announced.

 

 

 

OPEN FACE KILN-CASTING

At the Armory Art Center with McMow Master, Phil Materio

Thursday, November 3rd & 10th from 9am – 4:30 pm 
Tuition: $240 Lab Fee $64:

To register for this class hosted at the Armory Art Center please visit: http://www.armoryart.org/

 

 

INTRODUCTION TO FUSING

Wednesday November 2nd 6:30-8:30pm

$70.00 *Beginner Level*
Gain elementary knowledge of kiln formed glass in this two hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included

 

 

 

INTERMEDIATE FUSING

 

Saturday November 5th 9am-3pm

$150 .00 *Experience Required*
Take your fused glass skills to the next level in this full day course! Cutting techniques, kiln preparation, firing schedules, and compatibility & COE are just a few of the necessary fusing concepts that will be covered. Students are encouraged to focus on, and consider design when creating their choice of a fused & slumped plate or sushi platter. Introduction to Fused Glass (or equivalent) is a prerequisite. All materials are included.

 

 

 

WEARABLE ART!!!
DICHROIC JEWELRY: EXPLORING DESIGN TECHNIQUES


Wednesday, November 9th 6:30pm – 8:30pm

$95.00 *Beginner Level*

 


In this 3 hour course students will learn a multitude of jewelry design techniques that can be achieved using dichroic glass. The instructor will demonstrate techniques such as reverse etching, using a dremmel tool, and decal application. A variety of methods for making your fused dichroic pieces wearable will be covered as well. Students will create two pendants. All materials are included. Introductory level fusing knowledge is required.

 

 

 

 

NEW! FUSED LIQUID CAMING

Saturday, November 12th 9-3pm

$150 *Beginner-Intermediate Level*
Create this work of art using technique that gives the appearance of both fusing and caming in one project. Incorporate bright pops of color to create a stunning contrast! This class includes all materials & kiln firings.

 

 

BACK BY POPULAR DEMAND!!!

NEW: FUSING FORUM!

Hosted by Fused In Glass in Boynton Beach
Location: 1107 SE 2nd St, Boynton Beach, FL 33435
Wednesday, November 16th 6-8pm Free and Open to the Public!


PLEASE RSVP as space is limited! 561-585-9011 x100

About the Fusing Forum:

If you missed the fun at the last Fusing Forum – please join your fellow glass fusing enthusiasts for a night of conversation & connections this November! Local fusing artisans, hobbyists, and retailers will be invited to discuss fusing technique and ways in which we can continue to support the art glass industry. This forum’s theme will be about discussing your failures & successes. Use the knowledge of your fellow-fusers and LEARN from your mistakes! Bring your kiln-forming successes and failures to discuss with the group. This is an excellent opportunity to learn, and engage with the art glass community. Refreshments will be served.

Would you like to learn more about joining our Fusing Forum? Contact taylor@mcmow.com

 

LANDSCAPES with Frits & Powders

Saturday, November 19th from 9am – 3p m

$150.00
Be inspired by the beautiful landscapes and let your imagination create a serene scene made entirely of glass frits & powders. Students will learn fusing basics, as well as how to use fusing accessories such as stringers, frits and powders to bring life to their landscape. All materials and kiln firings are included.

 

 

 

 

SMALL BUSINESS SATURDAY!
Saturday, November 26th – Small Business Saturday – Support your local economy by shopping small! Special sales & give-a-ways to be announced.

 

 

 

DECEMBER
Special Dates to Remember in December!

Tuesday, December 13th McMow’s Annual Holiday Sale!


This one day event will be held from 9am – 9pm

Details to follow!

 

 

mcmowoct2016image002

Mosaic by Jane Wright

 

NEW! MOSAIC MASTER CLASS

WITH MOSAICIST JANE WRIGHT

Two-Part Class: Friday December 2nd & Saturday, December 3rd from 10am- 3pm

 $300 
*Basic Mosaic Knowledge Required*

 

 

In this two-day Contemporary Mosaic Master lass you will learn about creating design, technical cutting with mosaic nippers, problem solving, and grouting technique. Design choices will be provided and students can also bring in designs of their choice. Take your mosaic art to the next level and meet other mosaic enthusiasts! All materials are included!

 

About Jane Wright:

 

South Florida professional mosaicist/instructor Jane Wright creates fine art. Long before Jane began creating mosaics she had always been attracted to the art form because of its beauty, intricacy and amazing longevity. She finds her own inspiration from nature, personal moments in her life and a sense of whimsical fantasy. Jane uses a broad variety of materials to create a dramatic narrative of texture, movement and visual interest. She focuses on unique and well tested techniques and generously guides her students with her knowledge and practical advice.  She is a member of The Society of American Mosaic Artists and is presently on the administrative staff of the Contemporary Mosaic Artists.  Her exhibitions (both juried and non-juried): Florida, North Carolina, Georgia, Minnesota and Nevada.

 

 

TASTE OF FUSING

Wednesday December 7th 6:30 – 8:30 pm

$70.00 *Beginner Level*
In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included.

mcmowoct2016img_9561

Glass As Art Contest Winner, Gina Sneiderman

NEW! GO WITH THE FLOW

 Learn the “Harnessing Flow” Bullseye technique from our 2016 Bullseye Glass Category, Glass as Art Contest winner – Gina Sneiderman & Phil Materio

Take your fusing to the next level! Learn this INCREDIBLE technique

 

Two-Part Class: Saturday, December 10th & Saturday, December 17th 9am – 3pm

$350
*Intermediate – Advanced Level*
In this two-part Master Class students will learn the process of using heat, gravity, and beautiful Bullseye Glass to create a dimensional piece of kiln-formed art. Learn the following: The basics of how glass moves • The fundamental tools and materials necessary to harness flow within a body of glass • How to fire sheet glass arranged within an assembled mold that includes a ramp or incline to achieve flow within a finished piece. All materials and kiln-firing are included.

 

 

About Gina Sneiderman:

Gina Sneiderman started working with glass over the summer of 2012.  After selling her sign company, she gave herself some time to find her creative outlet and came across McMow Art Glass’ beginner stained glass class.  After completing that class and several stained glass projects, she decided to give fusing a try and was hooked, from the first day.  A short few months later, at the McMow Annual Holiday party, she bought her first kiln and the following year at the same party, she bought her second kiln. Gina has taken numerous classes in fusing at McMow Art Glass; at a couple of other teaching studios; and at the Glass Craft & Bead Expo in Las Vegas.
She especially likes to work with architectural styles of glass and with deep pieces – glass casting is her absolute favorite.

 

 

 

 

For more information about these events, classes our tours:

Taylor Materio, Creative Director
McMow Art Glass, Inc
561-585-9011 
Fax: 561-586-2292

www.mcmowartglass.com
www.facebook.com/mcmowartglass

 

 

 

 

 

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report, contact:

Rickie Leiter, Publisher

The Rickie Report

17019 SW Sapri Way

Port St. Lucie, FL 34986

Rickie@therickiereport.com

561-537-0291

Come To McMow Art Glass For Specialty Classes In April, May, And June

McMow Art Glass is offering new Specialty  Classes for April, May and June, 2016.  The Rickie Report shares the details of each class and an example of what you can create!  This is the perfect time to sign up yourself or with a friend!  Located in Lake Worth, McMow Art Glass is renown for their exceptional glass classes, personalized service and tremendous glass supplies.

 

 

 

mcmow_logo_4colorproces_AI8 [Converted]

701 North Dixie Hwy. Lake Worth, FL 33460

Phone Number: (561) 585-9011 Fax Number: (561) 586-2292

www.mcmow.com

Office Hours
Wednesday- Friday 9:00 am – 4:30 pm
Tuesday – 9:00 am – 8:30 pm
Saturday – 9:00 a.m – 3:00 p.m.
Sunday-Monday – Closed

 

 

APRIL-MAY-JUNE 2016

SPECIALTY CLASSES

PLEASE CALL 561-585-9011 x100 TO REGISTER

 

 

 

APRIL CLASSES

 

first_glass_15

 

INTRODUCTION TO FUSING

 
Wednesday April 6th 6-8pm

$70.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

 

IMG_8501

 

 

 

NEW!!! MONET LANDSCAPES in FUSED GLASS

 
Saturday April 9th 9am – 3pm

$150.00 *Beginner Level*

 

Be inspired by the beautiful painting of the famed Monet. Students will learn fusing basics, as well as how to use fusing accessories such as stringers, frits and powders to create stunning Monet inspired landscapes. Each student will complete two 8”X10” landscapes. All materials included.

 

 

Mcmowspecial_effects_8

 

 

 

SPECIAL EFFECTS with Bullseye Glass

Cutting Skills Required

Wednesday April 13th  6 – 9pm

$95.00

Learn to harness the reactive potential of Bullseye glass! Bullseye glasses are made with a variety of basic chemistries. When some of the glasses are combined with one another or with certain metal foils, the chemistries interact and produce special effects. Reactive effects can range from subtle to dramatic and can prove quite versatile in art and design. Learn more about the basic chemistries behind these effects and how to harness (or prevent) them to enhance your work. In this class you will study an extensive collection of samples and finished works and will make your own samples, using many forms of glass and foils. Basic glass cutting skills and kilnforming experience. All materials and kiln firings included.

 

 

 

 

McMowFLORAdiaglass60119A

 

 

Our Special Edition FLORAdia Glass is included!

 

NEW FLORAdia Fusing Experience

With McMow Master Phil Materio
Saturday April 16th 9am – 3pm

$175.00

Cutting Skills Required!

Learn to design and create a stunning piece of fused art. Master strip cutting technique and design in this one day class. Half a sheet of our FLORAdia Palm Beach or South Beach Glass styles are included in this class.

 

 

 

 

McMowTasteoffusing3ec97540-a9a9-4f5a-98f6-4d912c3cf85b

 

TASTE OF FUSING

 
Wednesday April 20th 6 – 8 pm

$70.00 *Beginner Level*

In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included.

 

 

McmowIMG_8503

 

 

 

 

NEW SELF PORTRAIT FUN in Fused Glass

Saturday April 23rd 9am – 3pm

$150.00

Cutting Skills Required!

Students in this class will learn how to distort images of themselves in Photoshop to create fun self-portraits. They will be guided through the process of using color and cutting technique to add interest to their fun self-portrait design. The pieces will be tack-fused creating a dimensional piece of art. All materials and kiln firings included.

 

 

Mcmowkilncarved_plates_1

 

 

 

KILN CARVING BASICS

 
Wednesday April 27th 6-8pm

$75.00 *Beginner Level*

Create your own beautiful kilncarved piece of art using only ceramic fiber paper and the heat of the kiln. No glass cutting required! This short workshop is a great introduction to fusing, kilncarving and slumping. After selecting a pre-fused square piece of glass, you’ll cut designs out of fiber paper using an Xacto knife. When your design is complete, you’ll set the glass on top. All materials and kiln firings included.

 

 

 

 

MCMOWlogo1-abstract-expressionism

 

 

NEW! ABSTRACT GLASSPRESSIONISM

With Randy Wardell
Saturday April 30th 9am-3pm

$250.00

 

This class will begin with a visual study of works created by the founders of the Abstract Expressionism movement that emerged in the 40’s & 50’s, during a time of Cold War politics and social conservatism. The style was defined as an unbridled artistic statement of freedom used to convey strong emotional or expressive content. These artists were inspired by the jazz music of their time, often listening to jazz while creating their works. We’ll follow their lead and have some fine jazz playing in the classroom studio to inspire our own Glasspressive content.

 

 

Randy will describe and demonstrate a number of decorative glass techniques that are essential for this process including frit stenciling, stringer shaping, wet noodles, powder smears, sifting, stick lighting, cold combing, flyspecking, plus many more. Class includes all materials and one kiln firing. Note: Forming and shaping firings are not included but can be arranged for an additional fee.

MAY CLASSES

 

 

 

 

mcmowcutting

 

 

COMPREHENSIVE CUTTING COURSE
Wednesday May 4th 5:30 – 8:30PM

$65.00 *Beginner Level*

 

 

In this three hour course Phil will teach students about different cutting & breaking tools, how to cut glass, and the do’s & don’ts of cutting glass. The class will end with a brief overview of a helpful cutting tool, The Morton System. This class is perfect for students who have taken an entry level fusing, mosaic, or stained glass class and are looking to improve or brush up on cutting skills. After taking this course, students should be comfortable enough with cutting to start working on pieces on their own. A 15% discount will be offered on cutting tools!

 

fusing

INTERMEDIATE FUSING
Saturday May 7th 9am-3pm

$150 .00 *Experience Required*

Take your fused glass skills to the next level in this full day course! Cutting techniques, kiln preparation, firing schedules, and compatibility & COE are just a few of the necessary fusing concepts that will be covered. Students are encouraged to focus on, and consider design when creating their choice of a fused & slumped plate or sushi platter. Introduction to Fused Glass (or equivalent) is a prerequisite. All materials are included.

 

 

 

 

McMowflowermosaictilef5dbd8a3-b564-4ab8-98d7-7371b8d447d0

 

 

 

NEW MOSAIC FLOWERS for Mother’s Day

Saturday May 7th 9am-3pm

$125.00 *Beginner Level*

Learn the mosaic basics including basic cutting, adhesive and grouting technique. Make a beautiful mosaic flower using beautiful colored glass and mirror. Give your Mom flowers that will last a lifetime! Includes all materials.

 

mcmowtasteoffusingimage005

 

 

TASTE OF FUSING
Wednesday, May 11th 6 – 8 pm

$70.00 *Beginner Level*

 

 

In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included

 

 

 

 

 

venetian_vitrigraph_main

 

NEW FUSING ACCESSORIES LAB

Frit, Stringer, Vitrigraph, Nuggets, & Murrine

Saturday May 14th- 9am – 12pm

$25.00

Learn from McMow Master Phil Materio how to create your own fusing accessories including frit, stringer and murrine. This will be a watch and learn lab experience. A basic knowledge of kiln-forming technique would be preferable.

 

 

first_glass_15

 

 

INTRODUCTION TO FUSING

Wednesday May 18th 6-8pm

$70.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

 

Mcmowdimensionalbox6697912c-ddc6-4bb8-bfe6-b0857ac4e3c0

 

 

 

DIMENSIONAL BOX MAKING w/Faith Part One
Saturday, May 21st  9am – 3pm

$150.00

Cutting Skills Required

Learn to construct a functional copper foil box and lid! In addition, this mixed-media class will teach you fusing basics and allow you to create a one-of-a-kind fused glass lid for your box creation. The perfect class to teach you three-dimensional basics. Includes all materials and kiln firings.

 

 

 

quick_tip_inky_blue_banner

 

 

NEW!! JAPANESE BRUSH STROKES – Powder Painting

Wednesday, May 25th 6 – 8pm

$75.00

 

 

Learn to create elegant brush stroked designs. Work with this high saturation pigment, gestural brush strokes in kilnforming. Think of sumi-e and other East Asian styles of brush painting and calligraphy.

 

 

 

 

Mcmowdimensionalbox6697912c-ddc6-4bb8-bfe6-b0857ac4e3c0

 

 

 

DIMENSIONAL BOX MAKING w/Faith Part Two

Saturday May 28th  9am – 12pm

SEE DESCRIPTION ABOVE

 

 

 

JUNE CLASSES

 

 

Free Workshop Wednesdays

9am – 4pm

Throughout the month of JUNE!

McMowTasteoffusing3ec97540-a9a9-4f5a-98f6-4d912c3cf85b

 

 

TASTE OF FUSING

Wednesday June 1st 6 – 8 pm

$70.00 *Beginner Level*

In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included.

 

 

mcmowsoldering608f944b-fed5-4263-811e-7abb01a5761a

 

 

NEW!!!! FOILING & SOLDERING LAB w/ Faith

Saturday June 4th 9am – 12pm

$25.00

Watch and learn from the McMow Masters! Tips and tricks of the trade on perfecting your foiling and soldering skills. This is a three hour lab – there is no hands on work. Question and answer/troubleshooting will follow the demonstrations.

 

 

 

first_glass_15

INTRODUCTION TO FUSING

Wednesday June 8th 6-8pm

$70.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

Mcmowdemoday

 

FREE DEMO DAY!

 
Saturday, June 11th

Details to be announced.

Demonstration times from 10am – 12pm AND 1– 3pm

McMow experts will demonstrate new products and techniques throughout the day~

Free and Open to the Public

 

 

MCmowbox_casting_main

 

 

NEW BOX CASTING The Bullseye Technique w/Phil

Part One Wednesday June 15th 6-9pm

$250

This course provides a relatively simple and direct introduction to kilncasting glass. As a student, you will create a thick glass block featuring reverse-relief imagery. The process will involve making refractory-plaster design elements, securing them in an open-faced mold, filling the mold with pieces of glass billet, and firing the mold in the kiln until the glass flows and covers the design elements. No prerequisites.

 

 

Saturday June 18th

SPECIAL SESSION TBA…Stay tuned!

 

 

MCmowbox_casting_main

 

BOX CASTING The Bullseye Technique w/Phil Part Two

Wednesday, June 22nd 6-9pm

SEE DESCRIPTION ABOVE

 

 

 

Saturday June 25th

SPECIAL SESSION TBA…Stay tuned!

 

 

 

PLEASE CALL 561-585-9011 x100 TO REGISTER

-Beginner & Intermediate stained glass class schedule also available-

 

 

 

BEGINNER STAINED GLASS SCHEDULE!

Upcoming Class Schedule March – May 2016:

Tuesdays March 8th – March 29th   5:30-8:30pm
Saturdays April 9th – April 30th   12-3pm
Tuesdays April 5th – April 26th   5:30-8:30pm

 

 

 

For more information: Contact McMow Art Glass

701 North Dixie Highway
Lake Worth, Florida 33460
P: 561-585-9011
F: 561-586-2292
www.mcmow.com

 

 

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report, contact:

Rickie Leiter, Publisher

The Rickie Report

P.O.Box 33423

Palm Beach Gardens, FL 33420

Rickie@therickiereport.com

561-537-0291

 

McMow Art Glass Announces 2016 Classes, Offers Special Discount During December Sale Event

McMow Art Glass is in the midst of their SALE WEEK and they are offering a discount on all classes listed in this article.  From beginners to advanced glass professionals, there is something for everyone!  What a perfect holiday gift!  The Rickie Report shares the details and photos.  Sign up now and get your discount!

 

 

mcmow_logo_4colorproces_AI8 [Converted]

 

701 North Dixie Highway
Lake Worth, Florida 33460
P: 561-585-9011
F: 561-586-2292
www.mcmow.com

 

Here is the information for McMow Art Glass 

NEW CLASSES! 

Please note that all of our classes, including these, will be on sale (20% OFF)  12/8-12/12/15!

Other Discounts for supplies available until 12/12/15!

 

JANUARY 2016 SPECIALTY CLASSES:

JAN2016

 

 

 

INTRODUCTION TO FUSED GLASS

Wednesday January 6th 6-8:30

$95.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two and a half hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

INTERMEDIATE FUSED GLASS

Saturday January 9th 9am-3pm

$150.00 *Experience Required*

Take your fused glass skills to the next level in this full day course! Cutting techniques, kiln preparation, firing schedules, and compatibility & COE are just a few of the necessary fusing concepts that will be covered. Students are encouraged to focus on, and consider design when creating their choice of a fused & slumped plate or sushi platter. Introduction to Fused Glass (or equivalent) is a prerequisite. All materials are included.

 

 

 

COMPREHENSIVE CUTTING COURSE

Wednesday January 13th 5:30-8:30

$60.00 *Beginner Level*

In this three hour course Phil will teach students about different cutting & breaking tools, how to cut glass, and the do’s & don’ts of cutting glass. The class will end with a brief overview of a helpful cutting tool, The Morton System. This class is perfect for students who have taken an entry level fusing, mosaic, or stained glass class and are looking to improve or brush up on cutting skills. After taking this course, students should be comfortable enough with cutting to start working on pieces on their own. A 15% discount will be offered on cutting tools the day of class!

 

FRAMING LAB

Saturday January 16th 9am-11:30am

$25.00 *Beginner Level*

Framing is one of the last steps in building a stained glass panel and one of the most important! Watch & learn the ins and outs of framing your stained glass projects. Lab participants will learn how to work with a variety of framing materials in this two and a half hour lab.

 

PANEL LAMPS

Saturday January 16th, 23rd, & 30th 12-3pm

$95.00 *Experience Required*

Lamps are one of the most sought after and treasured facets of the stained glass world. Create one of your own is this three-part class! Pattern, internal hardware, helpful stabilizing tools, and a copy of Wardell publications’ “Northern Shades” book will be included in the course cost! All other tools, glass, and materials will need to be provided or purchased by the student. A 15% discount will be offered on your choice of a lamp base the day of class. This is an intermediate level stained glass class; students must be proficient in cutting & soldering techniques.

 

 

INTRODUCTION TO FUSED GLASS

Wednesday January 20th 6-8:30pm

$95.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two and a half hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

PATTERN ADAPTATION LAB

Saturday January 23rd 9-11:30am

$25.00 *Beginner Level*

Learn the art of designing your own pattern in this informative lab! The process for adapting a pattern from a photo or other reference will be discussed. The instructor will also review how to design to make cutting easier, when to use lead came vs. copper foil, and where hooks should go on your panels. Have a question about a pattern you want to work on? This is the time to ask a professional.

 

 

TASTE OF FUSING

Wednesday January 27th 6-8pm

$70.00 *Beginner Level*

In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included.

 

 

GET TO KNOW YOUR KILN LAB

Saturday January 30th 9-11:30am

$25.00 *Beginner Level*

Learn all about your kiln in this informative lab! McMow Master, Phil, will explain the ins and outs of a kiln and how they work. All fusing levels welcome! Bring a paper and a pen to take notes. Phil will end the lab with a Question and Answer session.

FEBRUARY 2016 SPECIALTY CLASSES:

 

 

FEBRUARY2016

 

 

PATTERN BAR CASTING

Wednesday February 3rd & Wednesday February 10th 6-8pm

$150.00 *Experience Required*

Learn how to construct and cast pattern bars in this two part class. Specific firing schedules and formulas will be discussed. Students will choose from a variety of Bullseye glass to use when creating a rectangular shaped cast piece. This is an advanced level fusing class; introductory kiln forming knowledge and cutting experience are required. All materials are included. If desired, Pieces may be slumped for an additional & discounted fee.

 

 

 

OPEN FACE KILN CASTING

Saturday February 6th & Saturday February 13th 9am-3pm

$350.00 *Experience Required*

Go to a new dimension with your fused art pieces in this two part class! Students will learn how to make a one-of-a kind, three-dimensional, cast glass piece by using clay and a plaster mixture in an open face kiln casting technique. It’s a class every fuser is sure to love. This is an advanced level fusing class; introductory kiln forming knowledge is required. All materials are included.

 

 

DICHROIC JEWELRY: EXPLORING DESIGN TECHNIQUES

Wednesday February 17th 5:30-8:30

$95.00 *Experience Required*

In this 3 hour course students will learn a multitude of jewelry design techniques that can be achieved using dichroic glass. The instructor will demonstrate techniques such as reverse etching, using a dremmel tool, and decal application. A variety of methods for making your fused dichroic pieces wearable will be covered as well. Students will create two pendants. All materials are included. Introductory level fusing knowledge is required.

 

 

 

EXPERIMENTING WITH BULLSEYE GLASS:

THE ALCHEMY SERIES

Saturday February 20th 9am-12pm

$125.00 *Experience Required*

Bullseye Glass Company’s long history of artistic experimentation is just one of the many reasons we love their product. This is your opportunity to experiment with the latest edition to their line of reactive glass. Students will create their choice of a plate or sushi platter using silver foil and alchemy glass. This is an advanced level fusing class; introductory kiln forming knowledge is required. All materials are included.

 

                                                                             INTRODUCTION TO FUSED GLASS

Saturday February 20th 12:30-3pm

$95.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two and a half hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

ARCHAEOLOGICAL IMPRINTS IN GLASS

Wednesday February 24th 5:30-8:30pm

$125.00 *Experience Required*

Learn how to petrify live plant material into glass using the Fossil Vitra technique. Students will be provided with a variety of plant material, glass powders, and iridized glass to create their choice of a plate or sushi platter. All materials are included. This is an advanced level fusing class; introductory kiln forming knowledge is required.

 

 

 

GLASS PAINTING with PETER MCGRAIN

Friday February 26th, 27th, & 28th 9am-5pm

$800 *Beginner Level*

This 3-day workshop with world renowned glass artist, Peter McGrain, will include a fundamental overview of all the glass painting techniques with an emphasis on creative problem solving for a variety of aesthetic approaches. Techniques include tracing, matting, and the use of silver stains, enamels, and Vitri-Fusáille technique. Instruction includes several formula projects as well as an individual show piece by each student. This is a fantastic class for anyone who is interested in learning as much as they possibly can in a single workshop. No experience necessary. All materials include. PLEASE NOTE: a 50% non-refundable deposit is required to reserve your space. Payment in full is required two weeks prior to workshop start date. No discounts, class credits, or special offers will be given or honored.

 

 

MARCH 2016 SPECIALTY CLASSES:

 

 

INTRODUCTION TO FUSED GLASS

 

Wednesday March 2nd 6-8:30pm

$95.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two and a half hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

MOSAIC MIRRORS

Saturday March 5th 9am-3pm

$125.00 *Beginner Level*

Learn how to create a beautiful mosaic mirror in this one day class. Taylor will walk you through the process of mosaics from beginning to end while you work on your beautiful, one-of-a-kind creation! Class will end with a grouting demonstration to be completed at home. Pattern will be provided and all materials are Included.

 

TASTE OF FUSING

Wednesday March 9th 6-8pm

$70.00 *Beginner Level*

In this two hour session participants will learn about the basics of glass fusing, and work with a variety of glass materials including glass frits, powders, and stringers. You will complete your very own fused glass coaster. Each piece will be a one-of-a-kind functional piece of art. The completed fired pieces will be available for pick-up the following week. All materials are included.

 

 

COMPREHENSIVE CUTTING COURSE

Saturday March 12th 9am-12pm

$60.00 *Beginner Level*

In this three hour course Phil will teach students about different cutting & breaking tools, how to cut glass, and the do’s & don’ts of cutting glass. The class will end with a brief overview of a helpful cutting tool, The Morton System. This class is perfect for students who have taken an entry level fusing, mosaic, or stained glass class and are looking to improve or brush up on cutting skills. After taking this course, students should be comfortable enough with cutting to start working on pieces on their own. A 15% discount will be offered on cutting tools!

 

 

INTRODUCTION TO FUSED GLASS

Saturday March 12th 12:30-3pm

$95.00 *Beginner Level*

Gain elementary knowledge of kiln formed glass in this two and a half hour course. Fundamental fusing terminology, techniques, and principles will be covered. The class begins with a lecture and remaining time is spent creating a set of four fused glass coasters. This is an entry level fused glass class, no experience is necessary. After completing this class, students will be eligible to register for our intermediate level fusing classes. All materials are included.

 

 

 

FUSAICS: SCENES OF THE SEA

Wednesday March 16th, 23rd, & 30th 5:30-8:30pm

$185.00 *Beginner Level*

 

Create a unique “under the sea” scene using both fused glass AND mosaic techniques! The first class will be spent learning the basics of fusing and creating fused glass adornments to be incorporated into your mosaic piece on the second week. Overall dimensions will be 12” x 12”; Create your own pattern or choose from one of ours. All materials are included.

 

 

MORTON SYSTEM LAB

Saturday March 19th 12-3pm

$60.00 *Beginner Level*

Looking to brush up on your Morton system skills? Then don’t miss this opportunity! Bring in your own Morton System and Phil will teach you how to use it. Don’t have a Morton System? NO PROBLEM! Borrow one of ours for the lab and special order one of your own at a discounted price!

 

 

LEAD CAME

Saturday March 26th 9am-3pm

$150.00 *Experience Required*

If you are an intermediate student looking to take your work larger OR create professional looking panels, then this class is for you! With more than 30 years of experience, Jurgen will walk you through this ancient process step-by-step. Glass and lead is supplied, but you will need to bring your stained glass tools. Leave the class knowing the techniques of Old World Masters and with your very own leaded panel. This is an intermediate level stained glass class; students must be proficient in cutting & soldering techniques. Additional tools may need to be purchased.

 

 

INTERMEDIATE FUSED GLASS

Saturday March 26th 9am-3pm

$150.00 *Experience Required*

Take your fused glass skills to the next level in this full day course! Cutting techniques, kiln preparation, firing schedules, and compatibility & COE are just a few of the necessary fusing concepts that will be covered. Students are encouraged to focus on, and consider design when creating their choice of a fused & slumped plate or sushi platter. Introduction to Fused Glass (or equivalent) is a prerequisite. All materials are included.

 

 

 

For more information: Contact McMow Art Glass

701 North Dixie Highway
Lake Worth, Florida 33460
P: 561-585-9011
F: 561-586-2292
www.mcmow.com

 

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report, contact:

Rickie Leiter, Publisher

The Rickie Report

P.O.Box 33423

Palm Beach Gardens, FL 33420

Rickie@therickiereport.com

561-537-0291

McMow Art Glass Announces Week Of Holiday Sales On Supplies, Workshops And Classes

McMow Art Glass is very excited to announce a week-long holiday sale! Their new Specialty Class Schedule will be released and on sale as well! Not sure what to buy the glass creative in your life?  The Rickie Report suggests a Gift Certificate, so they can choose among classes, kilns, tools and supplies!  McMow is also taking Special Orders – and still offering the discount!  Here are the details.

 

 

mcmow_logo_4colorproces_AI8 [Converted]

 

McMow Art Glass

701 North Dixie Highway  Lake Worth, FL 33460
Phone: (561) 585-9011
Fax: (561) 586-2292

www.mcmow.com

 

 

 

McMowHOLIDAYSALE

 

It’s the most wonderful time of the year!
and it just got even more wonderful…

For the first time ever, we are EXTENDING our holiday party from a one day sale to a WEEK-LONG SALES EVENT!

NO MORE WAITING! NO MORE LONG LINES! NO MORE CROWDS! NO MORE PARKING ISSUES!

Hours of Operation during our Holiday Sale:

Monday December 7th:
CLOSED!

Tuesday December 8th:
9am-8:30pm

Wednesday December 9th:
9am-8:30pm

Thursday December 10th:
9am-4:30pm

Friday December 11th:
9am-4:30pm

Saturday December 12th:
9am-3pm

Sunday December 13th:
CLOSED!

Our NEW SPECIALTY CLASS SCHEDULE will be released the week of the holiday sale…

20% OFF ALL CLASSES!

We will also be having special events and demos throughout the week- details to be announced!

Missed the pre-order deadline?

NO PROBLEM!

There are still PLENTY of opportunities to take advantage of the discounts on all the items YOU WANT! We will have a TON of great tools, glass, and materials in-house during our week-long holiday sales event!

Don’t see what you’re looking for?

SPECIAL ORDER anything you’d like and still receive the discount!

CLASSES! KILNS! GIFT CERTIFICATES! AND MORE!

Discounts Include:

20% OFF ALL NON-FUSIBLE GLASS-
includes Spectrum, Wissmach, Kokomo, and Youghiogheny

35% OFF ALL BULLSEYE GLASS CO. PRODUCTS
(45% OFF for Bullseye premium pricing accounts)

20% OFF Materials & Supplies

15% OFF Kilns, Saws & Grinders

20% OFF Classes & Workshop time

For more information Call 561.585.9011 ext. 100

 

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report contact:

Rickie Leiter, Publisher

The Rickie Report

P.O.Box 33423

Palm Beach Gardens, FL 33420

Rickie@therickiereport.com

561-537-0291

Modern Tintype Workshops Premiere At Flamingo Clay Studio

Christine Ellinghausen will lead two Modern Tintype Workshops at Flamingo Clay Studio in Lake Worth, FL.  The separate workshops take place on Sept. 19th and Sept. 26th. This is a first workshop for this process in South Florida, and perhaps all of Florida…  It is the same one that will take place at the giant ADOBE MAX Creativity Conference, in October.  This non-toxic process that allows artists to alter their digital pigment images is from Dass Art™.  Apply your images to metal, plexi, glass and paper in your own studios!  The Rickie Report shares the details and urges you to sign up early!

 

 

M O D E R N    T I N T Y P E S

 

 

 

CGMSModernTintypesSlate Cover

 

Make your words and images move – In minutes!

 MODERN  TINTYPES

Two, Separate Workshops:

Sept. 19th   10 – 4

Sept. 26th  10 – 4

 

Flamingo Clay Studio

216 South F  Street

Lake Worth,FL

 

Once quaint and tiny, the historic tintype has been recreated and enlarged to new and dynamic possibilities by the use of the DASS ART™ Transfer Film process. Now this wonderful classic format can be appreciated on a variety of substrates.

 

Modern tintypes: Check out this Slate story Christine Created!

Make your words and images move – In minutes.

Download Slate for free here: http://www.adobe.com/go/slate-home

 

Workshop Details:

Workshop:  $125.     Materials:  $50.   Total Cost: $175.

Send check made payable to: Flamingo Clay Studio 

15 South J Street    Lake Worth, FL 33460

 

 

Christine Ellinghausen tells The Rickie Report, “This is a first workshop for this process in South Florida, and perhaps all of Florida…  And it is the same one that will be at the giant ADOBE MAX Creativity Conference, in October. For the 7000 particants.. Which I will be attending as staff for this element of the conference..as an authorized DASS ART™ instructor “.

 

 

 

“This process will allow artists to alter their digital pigment images and to apply them to metal, plexi, glass and paper in their own studios.  It is a Non-toxic process which  allows the artist to transfer photos in daylight, and does not require a darkroom. No vapor and no goo, the DASS ART™ process eclipses others as it will leave no sticky residue. Images made with the DASS ART™ system do not require glazing, that means no glass between the image and the viewer…”

 

 

 

For more information and to register, please contact Christine Ellinghausen

Cestudio@bellsouth.net

 

Flamingo Clay Studio


www.facebook.com/FlamingoClayStudio216SFSt?rf=

or

joyce@flamingoclaystudio.org

 

For coverage of your events, to place an advertisement, or speak to Rickie about appearing in The Rickie Report, contact:

Rickie Leiter, Publisher

The Rickie Report

P.O.Box 33423

Palm Beach Gardens, FL 33420

Rickie@therickiereport.com

561-537-0291